| 摘要 |
A polyamide moulding composition in particular for use for components in the drinking water sector, made of the following constituents: (A) from 25 to 74.9% by weight of at least one semicrystalline, semiaromatic nylon-6,T/6,I, composed of: (a1) from 65 to 82 mol % of terephthalic acid, based on the entirety of the dicarboxylic acids used; (a2) from 18 to 35 mol % of isophthalic acid, based on the entirety of the dicarboxylic acids used; (a3) 1,6-diaminohexane; (a4) at least one monobasic carboxylic acid; (a5) a phosphorus compound; with the first proviso that the molar ratio of the component (a3) to the entirety of the dicarboxylic acids used ((a1)+(a2)) is at least 1.04 and at most 1.15; and with the second proviso that the molar ratio of the component (a4) to the component (a3) is in the range from 0.01 to 0.08; (B) from 25 to 60% by weight of fibrous reinforcing materials; (C) from 0 to 30% by weight of particulate fillers; (D) from 0.1 to 2.0% by weight of heat stabilizers, with the proviso that no copper-containing stabilizers are present therein; (E) from 0 to 2% by weight of carbon black; (F) from 0 to 4% by weight of auxiliaries and/or additives differing from C, D and E; where the entirety of the components (A)-(F) makes up 100% by weight. |
