| 摘要 |
<p>A low temperature melt film such as EVA is prepared for laser capture microdissection by having a thin specimen non-adhering coating in the range of 0.1 % to 10 % of the total film thickness placed on the sample exposed side of the film. When the film is brought into contact with the specimen, the specimen non-adhering coating prevents non-specific transfer due to sticky adherence of portions of the sample. At the same time, the non-adhering coating on the low temperature melt film surface can stabilize and protect the low temperature melt film against variations in performance due to ambient humidity and temperature variation. Upon appropriate heating for laser capture microdissection, the barrier of the thin coating allows conventional film melting with otherwise uninhibited adhesion of selected cell areas to the film. Coatings on the low temperature melt film (EVA) surface in selected locations is made by applying film-forming material from a volatile solvent-based solution, followed by evaporation of the solvent. The coating solution can be applied by spraying, dipping, or adding exact volumes to a surface with a micropipet. Spreading a measured volume of solution over the surfaces can coat flat surfaces. The coating thickness can be controlled by the volume and concentration of coating solids added to a known area.</p> |
