Small Two bar specimen (TBS)

摘要

This innovation is a new type of the small specimens, nun-destructive, creep testing techniques, which are used to obtain creep properties and the remaining life time of the critical high temperature engineering components; when only small amount of material is available for creep testing. The small Two bar specimen (TBS) is suitable for use to obtain both uniaxial creep strain and creep rupture life data, using small material samples. The specimen has a simple geometry and can be conveniently machined and loaded through pin-connections for testing. This innovation is also an efficient testing method to determine the material creep constants which are used in creep models. The small two bar specimen can be made from small material samples removed from the component surfaces and then creep tested. The specimen is loaded using two loading pins under high temperature until the rupture of the specimen. The specimen deformation is recorded throughout the test duration and then the specimen deformation is converted to the corresponding uniaxial date. The converted test result than can be used to obtain the creep strength and to determine the remaining life time for the components. For validation the P91 steel at 600° C. and the modified version of P91 (bar-257) steel at 650° C., were used to validate the small two bar specimen (TBS) testing method. Very good correlation is found between the test results obtained from the small two bar specimen creep tests and from the corresponding uniaxial creep tests specimen. The advantages of the TBS creep test specimen over other small specimens creep testing techniques are also discussed.

主权项

1- The small two bar specimen designed to obtain the uniaxial creep data and to determine the remaining life time for the high temperature components, such as, components in the traditional and the nuclear power plants, chemical plants and oil refineries, using small material samples removed from these components.