| 摘要 |
1297865 Welding by fusion TELEDYNE Inc 17 July 1970 [15 Aug 1969] 34760/70 Heading B3R [Also in Division C7] A ferrous low-hydrogen are welding electrode having an electrically conductive core and a lime-fluoride coating comprises base components selected from metallic and oxide forms of Li, Na, K, Cs, Mg, Ca, Sr, Ba and acid components selected from metallic and oxide forms of Al, Si, so proportioned that the welding slag will have a basicity (mole ratio of basic oxide to acid oxide) of at least 2À2, the electrode having restricted sources of metallic and oxide forms of Ti so that the weld deposit contains less than 0À07% Ti. Preferably the basicity of the slag is at least 3, the deposit contains less than 0À045% Ti, and the core comprises a mild steel wire. The electrode core constitutes 45-80% by weight of the electrode, and the coating 20- 55%. The coating contains (by weight of the electrode) 0-30% alloying metal powder, 2-7% deoxidizer metal powder, 4-15% metal fluoride, 5-15% alkaline earth carbonate, 0-10% slag builder and modifier, and 0À5-8% inorganic binder. Titanium-bearing components of the electrode are selected from metallic and oxide forms in such quantity that the maximum value of the percentage by weight of the electrode of the titanium present in the coating as oxide, plus 2À6 times the percentage by weight of the electrode of the titanium present in the coating as metal is equal to about 1À71% for slag basicity >3, or about 1À18% for slag basicity of 3-4, or about 0À89% for slag basicity >4. Alternatively, the quantity is such that the ratio of the percentage by weight of the electrode of the titanium present in the coating as oxide, plus 11 times the percentage by weight of the electrode of the titanium present in the coating as metal, to the percentage by weight of the electrode of the carbon dioxide present in the coating, has a value of 0À04 to 0À13. Example 1 Core: standard commercial quality 5/32 inch mild steel Coating: (about 35% of electrode weight) Both of the foregoing examples may be bound with an alkali aluminate or an alkali silicate. Example 3 Core: as Example 1 (0À007% P; 0À02% S) Coating: (about 35% of electrode weight) (Binder): as Example 1 but without KOH. Slag basicity: 4À5 Deposit chemistry, per cent: It is not mandatory to use metallic Mg as a deoxidizer to raise slag basicity; other expedients are the use of MgO, reduction of binder silica content, increase of use of alkali hydroxides, carbonates, or titanates within the allowed limits, substitution of silicon by other deoxidizers, e.g. Ca, Li, Ti, or rare earths. In these examples, the electrodes were otherwise similar to that of Example 1, and produced a slag basicity of about 4À5. Other constituents of their deposits are: Example 8 Electrode similar to that of Example 1. Slag basicity: 4À42 Deposit chemistry, per cent: The electrodes are stated to desulphurize the deposit, and to lower its oxygen content; titanium in the electrode can be included in the core instead of the coating. |
