SOLAR WATER PURIFICATION CONE

摘要

"The Solar Water Purifying Cone" utilizes four different methodologies. The sun light is reflected by means of a cone made up of 8 to 16 or more sides (31). (formula for calculating the no. of sides = the circumference / the dia of the middle core, rounded to the nearest even no. upward). Sun light is diverted @ right angles to the reflective sides (2) which are at 45 degree angles. After the sun light is diverted, it is focused through a magnifying collar (23) into 100 to 400 plus burn points, which focus through a glass sheath (17) onto the center core (18). The center core is made of copper coiled lobe (11) to which fluid travels through. These copper coils (11) are coated with a powder black coating able to withstand 1000 degrees of heat. The color black is used based on the known theory that black attracts or absorbs heat (11). The glass sheath (17) is fitted over the black coils as tightly as possible, this acts like a green house around the core (18). This glass sheath (17) shields the center core (18) from any wind. The magnifying collar (23) has a row of magnifiers (21) for each side of the reflective cone (31), this process focuses sun light into defined burn points which go through the glass sheath (17) onto the center core of copper coils (11). The coils (11) are bent around a hollow pipe (8) which is fastened to the center of the reflector cone (31). The reflector panels (1,2) are held in or on a steel frame (3) which pivots (27) on a steel tubular stand (28). This process and device also what we have termed as " Solar water purifying distilling condenser". With the same device, the center core (18) is cooled as the outside is heated by the reflective cone (31). There is a condensing of any humidity in the air which collects rapidly on the coils (11). Since this water has already been distilled by mother earth, this process is actively amplified by the cooling and heating of the coil center core (18). This device can boil water through the coils (11) or produce steam which will distill water or collects humidity from the air which condenses on the core coils (11) to water. The device is focused into the sun by means of a single magnifying glass (32) that produces a sun dot on the face of the middle core top plate (10). The device is positioned so that the dot is in the center of the core face (10,18).